Want your profile here?

Becoming a member is easy! works with you to help you advance your career by putting you directly in front of tens of thousands of recruiters in your field. Sign up today on

RssRetired Government Worker looking for work

I am looking for an Industrial Spray painter job or warehouse/fork lift operator or order picker/packer or inventory control

Coating, Painting, or Spraying Machine Operator

Belleville, IL

About Me


Manufacturing & Production


Coating, Painting, or Spraying Machine Operator

Ideal Companies:


Education level:


Will Relocate:



Belleville, IL

Work Experiences

7/2008 - 1/2009

Tri-State Employment

Contractor / Freelance

  • Prep aircraft to get readt to paint. Such as tape and wrap all areas of airplane that could not get sanded. After aircraft was sanded I would blow off, wash aircraft, wipe down with thinner, prime aircraft then paint aircraft, and finially detape aircraft.

7/2008 - 7/2008

Aviation Personnel

Contractor / Freelance

  • I would repair, sand, and polish would cabinets out of corporate jets

5/2008 - 6/2008

Strom Aviation

Contractor / Freelance

  • I would touch up bare metal on United Airline Boeing Jets and also prep Coast Guard C-130 aircraft for chemical paint removal. I would tape all areas of aircraft not being stripped with metal tape and tin foil. Then apply stripper with a high pressure hose. After the stripper has set for 2 hours I would remove the stripper with a squeezee then reaaply stripper until all paint has been removed from aircraft. I would then use an high pressure hose and completly wash aircraft

4/2008 - 6/2008


Contractor / Freelance

  • I would tape, wrap, sand, scrap out sealer, polish chrome,wash and wipe down aircraft with thinner, prime and then apply top coats of polyuretane to corporate jets.

6/2006 - 4/2008


Contractor / Freelance

  • I would tape, and wrap and pripme and paint Transformers and Regulators and Pole mounts and pad mounts and Capacitators for Oklahoma Gas & Electric

10/2001 - 6/2006


Contractor / Freelance

  • I painted Transformers and pole and padmounts and all other types of electrical equipment for Oklahoma Gas & Electric

8/1984 - 10/2001

Tinker Air Force Base

Individual Contributor

  • I would repair structualy damaged aircraft by determining the method I would use and the type of metal I would use on the aircraft. I would also check on a daily basis all aircraft per work cards for corrosion and would treat as needed. I would also sand, and prime and paint aircraft

4/1981 - 8/1984

Robins Air Force Base

Individual Contributor

  • I would issue out tools from the tool crib, do inventory counts, recieve and ship out, load pallets with fork lifts as well as unload trucks using gas powered fork lifts. Build TCTO Kits for Air Force aircraft. Fill daily orders.