Want your profile here?

Becoming a member is easy! works with you to help you advance your career by putting you directly in front of tens of thousands of recruiters in your field. Sign up today on



Industrial Engineer

Rochester, NY

About Me


Engineering & Architecture


Industrial Engineer

Ideal Companies:


Education level:


Will Relocate:



Rochester, NY

Work Experiences

5/2008 - 1/2009

Delphi Automotive Systems

Entry Level

  • • Used Shainin’s method as one of the problem solving techniques, to define the “Green Y” (ultimate goal), and to identify and ultimately kill the “Red X” (problem). • Developed the Process Control Charts and conducted Capability Analysis to support supplier changes. • Prepared the “standard operating procedure (SOP)” for the operators and job setters working on different machines. • Optimized the flush process on assembly lines using Design of Experiments (DOE) as a tool. Three factors were varied and their effects were analyzed using Minitab software. • Worked with Production Control and Logistics (PC&L) to determine the cause of ‘inventory loss’ of two particular part types and recommended different ways of reducing the same. • Continuous improvement project which improved First Time Quality (FTQ) and reduced scrap by 20%. • Worked in a team to create PPAP (Production Part Approval) documents by laying out the PFD’s (Process Flow Diagrams), PCP’s (Process Control Plan), and FMEA’s (Failure Mode and Effect Analysis). • Implemented Lean Manufacturing Techniques to reduce the Lead Time of the “M2 bodies” from 9 Days to 4 Days and extra inventory by 40%.

6/2007 - 8/2007


Entry Level

  • • Developed Acceptance Sampling Plan for a given population and for postproduction parts for varying sample size and reduced incoming inspection from 100% to sampling based on statistical data. • Investigated customer complaints for needle damage through experimental plans and studied the effects of various factors which were responsible for damaging the needles using Design of Experiments as a problem solving tool. • Performed root cause analysis, using 5 Why’s and Fishbone Diagrams, to investigate customer complaints and suggested immediate and long-term actions in order to prevent the complaints and increase customer satisfaction. • Developed the validation models for different needle groups.

9/2006 - 5/2008

Rochester Institute of Technology

Individual Contributor

  • • Worked towards improving the reliability and robustness of the fuser in the Print Research and Image Systems Modeling Lab. • Performed Designing and Validation Experiments to support the findings. • Submitted a paper , “Application of the operating window concept to improve fuser reliability, A Case study on the failure modes of hot and cold offset”, to NIP24 and Digital Fabrication Conference, 2008.

7/2005 - 7/2006

Shilpa Industries

Individual Contributor

  • • Responsible for cost reduction and process optimization techniques. • Scheduled work based on takt time for the process and developed labor standards and SOP’s. • Interacted with vendors and suppliers on a daily basis. • Managed and Led 4-6 employees and coordinated the daily production schedule.



Master Degree

Rochester Institute of Technology

  • Industrial Engineering


Bachelor Degree


  • Mechanical Engineering